SquareFoot™ Concrete footing forms offer the fastest and most reliable support for your most important jobs.
SquareFoot™ is the ideal choice for all residential, commercial, agricultural, and industrial applications. There is a SquareFoot™ footing form for every application, large or small.
Step 1
SquareFoot™ and construction tube.
Step 2
Cut off excess plastic at top of wedges to desired construction tube size.
Step 3
Saw construction tube to desired length.
Step 4
Attach construction tube to SquareFoot™ footing form with a minimum of 4, 1“(2.5cm)screws.
Step 5
Excavate hole to a depth to avoid frost penetration under pier (Typically 5'(1.5m)).
Step 6
Place SquareFoot™ and construction tube on undisturbed soil or 4"-6"(10cm-15cm) of compacted crushed stone or gravel.
Step 7
Place SquareFoot™ footing form at desired location.
Step 8
Level/plumb construction tube/SquareFoot™ footing form prior to backfilling.
Step 9
Construction tube and SquareFoot™ footing form combined cannot extend 36" (91cm) or more above ground line/grade without being braced.
Step 10
Backfill using shovel or backhoe.
Step 11
Backfill making sure construction tube remains level/plumbed at desired location.
Step 12
Invert spare SquareFoot™ on top of construction tube to act as a funnel prior to concrete pour.
Step 13
Pour concrete in the top of inverted SquareFoot™.
Step 14
Remove the funnel and spray SquareFoot™ off. Trowel concrete.
Step 15
Install anchor bolt to accept bracket as required.
Enter the size and quantity of footing forms
Enter the size and quantity of constructions tubes
Concrete conversion: 60lbs (25 kg) = 0.50 ft3 (0.056m3), 80lbs (30 kg) = 0.66ft3 (0.018m3), 1 yard = 27 ft3 (0.76 m3).